RGNL-116 Tilt and Turn Window China Manufacturer: Hardware and Quote Specifications
Verified profile, glass, hardware and finish data for architects, developers, contractors and importers specifying the tilt and turn opening option within the RGNL-116 thermal-break window system.
What the Official RGNL-116 Page Confirms
Rogenilan’s official product title is RGNL-116 Thermal Break System Window. Its specification table lists tilt and turn as one opening mode alongside inward opening, outward opening and awning opening. This article addresses only the tilt and turn configuration and does not imply that every RGNL-116 unit is supplied with this hardware.
The official table also publishes the frame system, profile, thickness, glass, hardware, surface treatments and screen material. It does not publish maximum sash dimensions, sash-weight limits, a tilt angle, handle positions or hardware load data. Those items must be confirmed for the quoted window schedule.
Verified RGNL-116 Tilt and Turn Window Specifications
| Item | Official product-page information | Quote action |
|---|---|---|
| Official product | RGNL-116 Thermal Break System Window | State tilt and turn on every applicable opening reference. |
| System width | 116 mm | Coordinate wall depth, sill, interior trim and exterior interface. |
| Profile | 6063-T5 thermal-break aluminum profile | Request proposed frame, sash and mullion sections. |
| Aluminum thickness | 1.6-1.8 mm | Confirm the quoted section thickness in approval documents. |
| Listed glass | 5 mm + 15Ar + 5 mm double-glazed tempered build-up | Confirm safety, coating and project-specific glass requirements. |
| Other listed glass | Double or triple tempered, laminated, Low-E, reflective and tinted options | Specify the complete build-up rather than only the glass type. |
| Hardware | Germany Wehag system hardware | Confirm the tilt and turn set, handle, hinges and locking schedule. |
| Opening modes | Inward, tilt and turn, outward and awning opening | Mark one approved mode on each elevation. |
| Surface treatments | Powder coating, anodized, wood grain and PVDF coating | State finish and approved color reference. |
| Screen | Alloy wire mesh | Confirm screen arrangement and access for an inward-opening sash. |
How the Published Opening Modes Differ
Tilt and Turn
The same sash can tilt inward at the top for restricted ventilation or turn inward from the side. Confirm the complete hardware set and interior clearance.
Inward Opening
A turn-only inward-opening unit may use a different hardware schedule. Do not assume that inward opening automatically includes the tilt function.
Outward Opening
The sash projects outside the building envelope. Its hinges, drainage, screen arrangement and clearance differ from the tilt and turn configuration.
Awning Opening
A top-hinged sash projects outward at the bottom. Mark it separately so the factory does not price tilt and turn hardware for an awning opening.
Tilt and Turn Hardware Approval Checks
Begin with the interior elevation and opening schedule. Mark the hinge side, handle side and opening direction for every sash. Check the full inward-turn path against curtains, furniture, counters and interior circulation. The tilted sash also needs clear space at the head.
Send the sash width, height, glass build-up and proposed hardware together because glass weight and sash size affect hardware selection. Ask the manufacturer to confirm the permitted size and weight for the quoted Wehag hardware rather than applying limits from another series.
What Changes the Factory Quote
The tilt and turn hardware package is only one price input. Compare suppliers against the same window schedule and scope.
- Sash width, height and quantity
- Tilt and turn versus single-mode units
- Hardware set and locking schedule
- Glass build-up and sash weight
- Fixed and operable panel layout
- Mullions and project-specific sections
- Finish and approved color sample
- Alloy mesh and accessory scope
- Trims, sills, anchors and flashings
- Packaging, destination and delivery terms
Information to Send for an RGNL-116 Quote
Send a coordinated enquiry package so the China manufacturer can price and review the intended hardware configuration.
- Project location and building type
- Window schedule with dimensions and quantity
- Interior and exterior elevations
- Hinge side and handle side
- Tilt and turn sash references
- Fixed and other opening modes
- Exact glass specification
- Finish and color reference
- Screen and accessory requirements
- Wall, sill, head and jamb details
- Required reports or calculations
- Destination, Incoterm and target date
FAQ
Is tilt and turn an official RGNL-116 opening option?
Yes. The official RGNL-116 product table lists tilt and turn among four opening modes. The selected mode must still be stated on the quotation and approval drawings.
Does every inward-opening RGNL-116 sash include a tilt function?
No such assumption should be made. The page lists inward opening and tilt and turn separately, so the required dual-function hardware should be named for each sash.
What tilt angle and maximum sash size are published?
The official page does not publish a tilt angle, maximum sash dimensions or hardware load limit. Submit the sash size and glass build-up for written confirmation.
Which glass build-up is listed?
The page lists 5 mm + 15Ar + 5 mm double-glazed tempered glass and also names other available glass types. Confirm the exact project build-up in the order specification.
What should importers approve before production?
Approve the opening schedule, sash dimensions, hardware, glass, finish, screens, profile drawings, installation interfaces, packaging scope and any required performance documents.
Request an RGNL-116 Tilt and Turn Window Quote
Send Rogenilan your window schedule, elevations, sash sizes, hinge sides, glass, finish, screen requirements, quantity and destination. The factory can review the RGNL-116 tilt and turn configuration against a defined project scope.
