RGNL-100 Aluminum Entry Door China Supplier Price Factors
An RGNL-100 entry door quotation changes with leaf arrangement, infill, glass, finish, dimensions and delivery scope. Overseas buyers should define these inputs before comparing a China supplier’s price.
Price Starts with a Controlled Door Schedule
The official RGNL-100 Heavy Aluminum Plate Entry Door page identifies a 100 mm thermal-break aluminum system. Its current WooCommerce assignment is the Casement Doors product category.
The page provides selectable configurations, not a fixed project price. Each door mark should state size, handing, opening arrangement, infill, glass, finish and supply boundary. The quotation can then separate the base configuration, options and exclusions.
RGNL-100 Entry Door Quick Specs
| Specification | Published product data | Quotation control |
|---|---|---|
| Official series | RGNL-100 Broken Bridge Heavy Aluminum Plate Entry Door | Keep the exact product identity on drawings and quotes |
| System width | 100 mm | Request the proposed head, jamb, sill and leaf sections |
| Profile | 6063-T5 thermal-break aluminum | Link the profile schedule to each door mark |
| Aluminum thickness | 2.0-4.0 mm | Require the supplier to identify where each thickness applies |
| Glass families | Tempered; double or triple tempered; laminated, Low-E, reflective or tinted | State one complete pane-by-pane build-up |
| Published glazing notation | Tempered 5 mm + 24Ar + 5 mm | Confirm the notation and proposed assembly in writing |
| Middle-section choices | Aluminum honeycomb board or double glazing | Show the infill type and area on the approved elevation |
| Surface treatments | Powder coating, anodized, wood grain or PVDF coating | Use an exact finish reference and sample process |
| Opening modes | Single, unequal-double or double door | Define active leaf, handing and swing for every opening |
No current unit price, minimum order, lead time, freight rate, performance value or certification is stated here. Obtain those items through a project-specific quotation or applicable supporting document.
Six Factors That Change the Quoted Scope
1. Leaf Arrangement
A single door, unequal double door and equal double door are different assemblies. Fix the active leaf, handing, swing and meeting condition before asking for a final price.
2. Dimensions and Quantity
Provide the structural opening, required frame size, leaf size and quantity for every door mark. A general area rate cannot show these fabrication differences.
3. Plate, Panel or Glass Infill
The product page lists aluminum honeycomb board and double glazing as middle-section choices. The elevation should define the selected infill and its position.
4. Complete Glass Build-Up
The official table lists several glass families. Pane sequence, heat treatment, laminate, coating, tint and cavity details should be returned as one priced assembly.
5. Finish and Hardware Schedule
Choose one listed surface-treatment route, color reference and sample requirement. Separately define handle, lock, access and hinge functions instead of relying on a generic hardware line.
6. Packing and Delivery Boundary
State protection, package identification, destination and delivery basis. Separate door supply from freight, local handling, installation and surrounding construction.
Normalize Quotations Before Comparing Price
Put each return into one comparison sheet. Record currency, quantity basis, frame and leaf configuration, infill, glass, finish, hardware functions, drawings, samples, inspection, packing, delivery boundary, exclusions, alternatives and quotation validity.
Every deviation should reference the affected door mark. A changed glass family, opening mode or finish must not disappear inside a revised total. This keeps the commercial comparison tied to one technical scope.
Define the Configuration Before Final Pricing
- Issue the door schedule, elevations, quantities and viewing side.
- Select single, unequal-double or double-door opening.
- Mark active leaves, handing, swing and access functions.
- Define aluminum plate, honeycomb panel or glazing areas.
- State the complete glass build-up where glazing is used.
- Approve the finish route, color and physical sample process.
- Confirm documents, inspection, packing and delivery scope.
Project design, local code, exposure and installation responsibilities still require project-specific review. The public product table is a quotation basis, not proof of suitability for every opening.
RFQ Inputs for a Product-Specific Price
- Project location and delivery destination
- Door schedule with dimensions and quantities
- Interior and exterior elevations
- Opening arrangement, handing and swing
- Panel, plate and glazing layout
- Complete glass build-up by door mark
- Finish route, color and sample reference
- Hardware and access-control functions
- Required shop drawings and approvals
- Inspection and documentation requirements
- Protection, packing and package marks
- Currency, delivery basis and quote validity
Send the controlled RFQ to Rogenilan for a marked product-specific return.
RGNL-100 Entry Door Price FAQ
Does Rogenilan publish a standard RGNL-100 entry door price?
No current standard price is stated in the verified product table. A quotation needs the door schedule, opening configuration, infill, glass, finish and supply scope.
Which opening arrangements are listed?
The official table lists single door, unequal double door and double door. The quotation should also identify the active leaf, handing and swing.
Can the RGNL-100 use a panel instead of glass?
The product table lists aluminum honeycomb board or double glazing for the middle section. Show the selected infill and its location on the approved elevation.
Which finish routes appear on the product page?
Powder coating, anodized, wood grain and PVDF coating are listed. Ask the quote to identify the selected route, color reference and sample requirement.
How should overseas buyers compare two quotations?
Use the same drawings, dimensions, quantities, opening mode, infill, glass, finish, hardware functions, documents, packing and delivery boundary. Record exclusions and alternatives separately.
Request an RGNL-100 Entry Door Quote
Share the door schedule, elevations, opening arrangement, infill, glass, finish, hardware functions, approval documents, packing and destination. Rogenilan can return a quotation against one controlled product definition.
