RGNL-93 Inward-Opening Casement Window China Manufacturer Quote
For a dependable quotation, define the inward-opening configuration as clearly as the RGNL-93 system itself: hand, view direction, dimensions, glass, finish, hardware functions and the project drawings that control them.
Start With the Exact Inward-Opening Configuration
The official RGNL-93 Thermal Break Aluminum Casement Window page identifies inward opening as one available mode. It also lists tilt-and-turn, outward-opening and awning options. An inward-opening quote should not assume that every system unit uses the same sash, clearance or operating details.
Use the product name together with the selected mode on the window schedule. Buyers can also review the Casement Windows product category before sending drawings. The critical identifiers are each opening mark, the inside/outside viewing direction, hinge side and handle side.
Verified RGNL-93 Quick Specs
| Item | Published product information | Quote control |
|---|---|---|
| Base system | RGNL-93 Thermal Break Aluminum Casement Window | Repeat the series on the schedule and elevation. |
| Frame width | 93 mm | Request proposed head, jamb and sill sections. |
| Profile | 6060-T6 aluminum profile | Confirm documentation required for the order. |
| Aluminum thickness | 1.8 mm | Confirm the quoted members and any project-specific revision. |
| Listed glass families | Tempered; double or triple tempered; laminated, Low-E, reflective or tinted | State the exact make-up and treatment by window mark. |
| Listed double glazing | 5 mm + 15Ar + 5 mm | Confirm whether this is the approved glass build-up. |
| Opening modes | Inward, tilt-and-turn, outward and awning opening | Identify inward opening for each applicable unit. |
| Surface routes | Powder coating, anodized, wood grain and PVDF coating | Approve color, gloss, texture and sample. |
Inward Opening: Details That Need Drawing Control
Hand and viewing direction
Mark left or right hinge from a stated viewing side. A label without its viewing direction can reverse the delivered configuration.
Interior clearance
Coordinate the swing arc with furniture, curtains, blinds, radiators and cleaning access. Record any required restrictor or hold-open function.
Glass and safety
Specify each pane build-up, treatment and required safety condition. Do not rely on a general “double glass” note.
Finish approval
Choose the coating route, color reference, gloss and texture. The published page does not establish one universal white, so a project sample should govern.
How to Review the Quotation
Compare like for like: series, opening mode, sizes, glass, finish, hardware functions, screens, trims, packing and delivery scope. A lower figure may simply omit a requested accessory, document or handling requirement.
For inward-opening units, ask for a drawing or schedule that shows the interior elevation. Verify that the opening direction works alongside walls and adjacent units. If a tilt function, child-safety restriction or special handle height is required, identify it in the RFQ rather than treating it as a standard feature.
Factors That Change an RGNL-93 Quote
- Unit width, height and quantity
- Inward-opening and fixed-lite layout
- Exact glass build-up and treatment
- Hardware function and handle position
- Finish route, color and sample approval
- Screens, trims and perimeter accessories
- Drawings and project documentation
- Packing, destination and Incoterm
What to Send for a Quote
Send a numbered window schedule, elevations, wall sections and project location. Include the rough-opening dimensions and state whether each drawing is viewed from inside or outside.
- RGNL-93 item marks and quantities
- Inward-opening hand for each unit
- Width, height and wall-interface details
- Glass specification and safety requirements
- Handle, lock, restrictor and screen needs
- Finish reference, gloss and sample requirement
- Required drawings or supporting documents
- Delivery destination and requested terms
FAQ
Is inward opening an official RGNL-93 option?
Yes. The official RGNL-93 product page lists inward opening among its available modes. Identify that mode on every applicable drawing and schedule line.
What frame information is published?
The page lists a 93 mm frame width, a 6060-T6 aluminum profile and 1.8 mm aluminum thickness. Confirm the proposed sections for the actual order.
Which glazing is listed?
The page lists tempered, double or triple tempered, laminated, Low-E, reflective and tinted glass options, plus a 5 mm + 15Ar + 5 mm double-glazing notation. Confirm the final build-up in writing.
Can a universal maximum sash size be quoted from the page?
No. Maximum dimensions and glass-weight limits are not published there. Supply the actual unit sizes and glass selection for project review.
Why does the viewing direction matter?
It determines the correct hinge hand and swing direction. State the view direction on elevations so inward-opening units are not mirrored incorrectly.
Request an RGNL-93 Inward-Opening Quote
Send Rogenilan the window schedule, elevations, dimensions, glass requirement, inward-opening hand, finish reference, hardware functions, quantity and delivery destination. The team can review the defined configuration before preparing a project quotation.
