RGNL UPVC Windows and Doors China Manufacturer Glass Specs
The official RGNL UPVC product listing publishes the frame material, custom sizing, a specific double-glazing notation and four opening families. Project buyers should convert that baseline into a controlled glass, opening and interface schedule before comparing a China manufacturer quotation.
Direct Answer for Project Buyers
The official RGNL-UPVC Windows And Doors page lists UPVC frame material, customized size and color, several glass families, the source notation 5 mm + 12Ar + 5 mm, and swing, sliding, hung and awning opening modes.
That listing is a product-family baseline, not a complete project specification. A usable quotation must return the exact unit type, dimensions, opening direction, glass build-up, reinforcement and frame sections, hardware, drainage, installation interface and applicable evidence for each opening mark.
Verified Quick Specs and Buyer Actions
| Item | Official Listing | Buyer Action |
|---|---|---|
| Product | UPVC windows and doors; Rogenilan brand | Keep the product identity and individual opening marks on the quote and drawings. |
| Frame material | UPVC | Request the offered frame and reinforcement sections for the selected size and operation. |
| Size | Customized | Supply structural and finished openings; require approved manufacturing dimensions. |
| Glass families | Tempered, double tempered, laminated, Low-E, reflective and tinted choices are listed | Choose one complete build-up and identify treatment, coating surface and safety requirements. |
| Double glazing | Source notation: 5 mm + 12Ar + 5 mm | Ask Rogenilan to define every layer, the cavity and gas notation in the returned specification. |
| Color | Customized | Approve a physical color sample and record the interior and exterior finish requirement. |
| Style | Modern | Use controlled elevations and sections rather than relying on the style label. |
| Opening modes | Swing, sliding, hung and awning | Mark the selected operation, handing, active units, handle positions and clearance. |
Compare the Published Opening Configurations
Swing Units
Define window or door use, interior and exterior viewing sides, handing, sash clearance, hardware position and surrounding finishes. The returned elevation should identify every active and fixed lite.
Sliding Units
Specify panel travel, track count, overlaps, clear opening, locks, drainage and cleaning access. Do not assume a track or roller configuration from the family name.
Hung Units
Identify which sash moves, the required opening limit, balancing method, screen, glass weight and service-access requirements before approval.
Awning Units
Show hinge location, opening limit, handle or operator access, exterior projection and coordination with screens, rain paths and nearby construction.
How to Control the Glass Specification
Start with the project location, opening size, safety requirement, thermal and acoustic targets, appearance and local rules. Then write one complete glass build-up instead of requesting only “double glass” or “Low-E.” Identify pane thickness, heat treatment, laminate, coating surface, tint, cavity, spacer, gas, safety marking and any edge or visual acceptance criteria.
The product page uses the wording “Automotive Grade Tempered Glass” and the notation 5 mm + 12Ar + 5 mm. Because it does not identify a standard, report or full notation key, buyers should ask for a written explanation and the evidence applicable to the offered assembly rather than converting those words into an unsupported performance claim.
Price and Quotation Factors
A comparable quotation must hold the selected operation and glass scope constant. Price can change with these controlled variables:
- Window or door type and unit quantity
- Custom width, height and panel layout
- Frame and reinforcement sections
- Opening mode, handing and hardware
- Complete glass build-up and treatment
- Custom color and sample approval
- Screens, trims, sills and accessories
- Drainage and installation interfaces
- Required samples, reports and inspections
- Packaging, destination and Incoterm
RFQ Information to Send
Send an opening schedule with mark, location, window or door type, structural opening, finished opening, quantity, viewing side, opening mode, handing, fixed and active areas, glass requirement, frame color, screen, hardware functions, destination, Incoterm and required evidence.
Ask Rogenilan to return marked elevations and sections; manufacturing dimensions; frame and reinforcement details; exact glass notation; opening limits; hardware codes and positions; drainage and installation details; accessories; packing method; inclusions, exclusions and alternatives. Keep every deviation in an exception register before commercial comparison.
RGNL UPVC Product FAQ
Which glass build-up is published for this RGNL UPVC product?
The official page lists the source notation 5 mm + 12Ar + 5 mm for double glazing. Ask the supplier to define the cavity and gas notation, glass treatment, spacer and applicable evidence in the returned specification.
Which glass families does the official page list?
It lists tempered, double tempered, laminated, Low-E, reflective and tinted choices. The final order should use one unambiguous build-up that identifies every pane, treatment, coating and cavity.
Are standard sizes published?
No fixed size is stated. The listing says customized, so buyers should submit the opening schedule and require manufacturing dimensions and feasibility in the approved drawings.
Can every listed opening mode use the same glass and hardware?
The page does not establish that. Swing, sliding, hung and awning are listed as opening families, but each unit still needs a configuration-specific return drawing, glass check, hardware schedule and written approval.
Request an RGNL UPVC Specification Quote
Send the opening schedule, selected operation, glass brief, sizes, color, hardware functions, quantity and destination. Ask for a marked return specification tied to the exact RGNL UPVC windows and doors configuration.
