RGNL-70 Commercial Gate China Manufacturer: Glass, Hardware and Quote Specifications
A product-specific review of the published 70 mm frame, aluminum profile, glazing, hardware and finish information for commercial door project enquiries.
Official Product Basis for the RGNL-70 Commercial Gate
Rogenilan’s official product title is RGNL-70 Broken Bridge Flat Door-Commercial Gate. The public specification table lists a 70 mm frame, 6063-T5 aluminum and 1.8 mm thickness. The product is currently assigned to the site’s Casement Doors category, so this article uses that verified WooCommerce link rather than guessing an Exterior Doors assignment.
The table also lists three glazing build-ups, a 42 mm slot, system hardware and powder-coating colors. It does not publish unit-size limits, leaf weight, swing direction, threshold details or project-specific performance reports. Those items must be defined in the enquiry and confirmed on shop drawings.
Verified RGNL-70 Commercial Door Specifications
| Item | Official product-page information | Quote action |
|---|---|---|
| Official product | RGNL-70 Broken Bridge Flat Door-Commercial Gate | Use the exact model name in the enquiry. |
| Frame size | 70 mm | Confirm the frame section and wall interface. |
| Profile | 6063-T5 aluminum | Request the proposed section drawing. |
| Thickness | 1.8 mm | Confirm where the stated thickness applies. |
| Double insulating glass | 5 mm + 21A + 5 mm tempered | Confirm coatings, gas fill and safety treatment. |
| Laminated insulating glass | 5 mm + 1.14 PVB + 5 mm + 12A + 5 mm | Verify pane orientation and project suitability. |
| Triple glazing | 5 mm + 12A + 5 mm + 12A + 5 mm | Confirm final glass weight and hardware review. |
| Glass slot | 42 mm | Match the selected glass build-up to the proposed section. |
| Hardware entry | CMEMCH system hardware from the United States | The page spells the brand CMEMCH; confirm the exact brand and schedule in writing. |
| Powder-coating colors | Flange white, Rain flower stone, Gran coffee and Sand black | Confirm translated names with an approved color sample. |
Compare the Published Glass Configurations
Double Insulating
The listed 5 + 21A + 5 mm option needs a complete glass schedule. State any coating, tint, safety treatment and gas requirement instead of approving only the total build-up.
Laminated Insulating
The published configuration includes a 1.14 mm PVB interlayer. Confirm which side receives the laminated pane and which project safety requirement it is intended to address.
Triple Glazing
The listed triple build-up increases glass weight. Ask the manufacturer to review leaf dimensions, hinges, locks and operating clearances for the proposed unit.
Commercial Entrance Selection and Approval Checks
Begin with the structural opening, finished floor levels, required clear opening and traffic direction. Mark the hinge side and inward or outward swing on the elevation. Show the frame position, wall build-up, threshold, weather line and any access-control interface.
The product table contains a translated track-selection entry of “high orbit, low orbit” but does not explain the threshold geometry. Do not convert that phrase into a technical promise. Request drawings for the proposed sill or threshold and coordinate drainage, accessibility and floor finishes before approval.
What Changes the China Factory Quote
A useful commercial door quotation must define the full assembly and supply boundary, not only the frame series.
- Opening width, height and quantity
- Single or paired door arrangement
- Handing and swing direction
- Selected glass build-up
- Hardware, lock and handle schedule
- Threshold and drainage detail
- White or other approved color sample
- Access control and door closer scope
- Installation accessories and interfaces
- Packaging, destination and Incoterm
Information to Send for an RGNL-70 Quote
Send one coordinated enquiry package so the manufacturer can review the intended commercial entrance before pricing.
- Project location and building use
- Door schedule and marked elevations
- Structural opening and finished levels
- Required clear opening
- Door handing and swing direction
- Glass and safety requirements
- Hardware and locking functions
- Finish process and color reference
- Required reports or calculations
- Delivery destination and target date
FAQ
What frame size does the RGNL-70 commercial gate use?
The official table lists a 70 mm frame with 6063-T5 aluminum and 1.8 mm thickness. Confirm the proposed sections and the location to which the thickness applies.
Which insulating glass options are published?
The page lists double tempered insulating glass, a laminated insulating build-up and triple glazing. The final quotation should identify every pane, cavity, interlayer, coating and safety treatment.
Is white a listed finish?
The powder-coating list includes “Flange white.” Because the color name is translated and no color code is published, approve an exact reference and physical sample before production.
Which hardware is listed?
The public table says “CMEMCH system hardware from the United States.” Keep that spelling as source data and ask the supplier to confirm the exact brand, model and hardware schedule.
Does the product page state the permitted door size?
No. It does not publish minimum or maximum unit dimensions or leaf weight. Send the opening schedule for project-specific review.
Request an RGNL-70 Commercial Door Quote
Send Rogenilan your door schedule, opening dimensions, glass, hardware, threshold, white color reference, documentation requirements, quantity and destination. The China manufacturer can review the defined scope before pricing.
