RGNL-45 Casement Window China Manufacturer Finish Options
The official RGNL-45 listing provides four surface-treatment routes: powder coating, anodized, wooden grain and PVDF coating. Buyers should convert that choice into an approved finish schedule with exact color, texture, viewing side and sample controls before pricing and production.
Define the Finish Before Comparing Quotes
The official RGNL-45 Series Aluminum Casement Windows page lists powder coating, anodized, wooden grain and PVDF coating. A quotation that states only “white,” “silver” or “wood look” leaves the process, appearance and approval basis unresolved.
Use the Casement Windows product category to confirm the product family, then issue a finish schedule tied to each window mark. The official product data establishes the available families; the exact color reference, gloss, texture and interior/exterior allocation must be confirmed for the order.
RGNL-45 Quick Specs
| Item | Published RGNL-45 data | Buyer control |
|---|---|---|
| Product | RGNL-45 Series Aluminum Casement Windows; the product table names the RGNL-45 Thermal Break System Awning Window | Keep the public product URL and agreed series description on the RFQ |
| Profile | 6063-T5 thermal-break aluminum profile, 45 mm width, 1.6 mm aluminum thickness | Confirm where the published dimensions apply on the approved section |
| Glass families | Tempered, double or triple tempered, laminated, Low-E, reflective or tinted options | Specify one complete make-up per window mark |
| Listed insulating build-up | 5 mm + 15Ar + 5 mm | Request a returned glass schedule without reinterpreting the source notation |
| Surface treatments | Powder coating, anodized, wooden grain or PVDF coating | State process, color reference, gloss, texture and sample requirement |
| Opening modes | Inward, tilt-and-turn, outward or awning | Assign mode and handing to every window ID |
The official page does not publish a universal standard color, coating thickness, gloss, tolerance, warranty or finish-specific performance value. Obtain those details for the exact quoted order.
Compare the Four Published Finish Routes
Powder Coating
Identify the required color system, exact reference, gloss and texture. Ask whether interior and exterior faces use one color or a controlled dual-color schedule.
Anodized
Define the intended appearance and require a representative sample. Record any required process description and acceptance documents in the returned quotation.
Wooden Grain
Approve the pattern, base color, direction and joint appearance on a physical sample. Do not approve from a generic screen image alone.
PVDF Coating
State the exact color, sheen and project documentation required. Ask the quotation to identify the proposed coating system and any exclusions.
How to Select and Approve the Finish
- Divide the window schedule by building zone, interior palette and exterior façade requirement.
- Choose one published finish family for each zone, then define color, gloss and texture.
- Mark whether the same finish applies to frame, sash, screen frame, trims and visible accessories.
- Request a physical sample with a unique approval reference before production release.
- Record the accepted viewing conditions and the process for handling an appearance deviation.
White can be requested through an appropriate finish route, but the official page does not identify one universal standard white. Submit the required color reference and sample expectation for written confirmation.
Finish and Configuration Cost Factors
The official product page does not publish a fixed price. Quote differences may reflect the chosen finish route, single- or dual-color work, sample preparation, profile and frame area, glass build-up, opening mode, hardware configuration, quantity, accessories, inspection scope, packing and delivery terms.
Keep window marks, dimensions, glass, opening modes and delivery basis identical when comparing offers. Require each quotation to state the included finish process, sample scope, color exceptions and unresolved technical points.
What to Send for an RGNL-45 Quote
- Window schedule with sizes, quantities and marks
- Elevations with opening mode and handing
- Finish family for each building zone
- Color reference, gloss and texture
- Interior and exterior color allocation
- Glass make-up and coating details
- Screen, trim and accessory finish scope
- Physical sample and approval requirement
- Inspection and document requirements
- Destination, packing and delivery basis
Send the controlled finish schedule to Rogenilan with the window drawings and quantities.
Frequently Asked Questions
Which finishes are published for the RGNL-45 casement window?
The official product table lists powder coating, anodized, wooden grain and PVDF coating. The final process, color and appearance still require order-specific confirmation.
Is white a published standard color?
The official page lists finish families but does not define one universal standard white. Provide a color reference, gloss and texture, then approve a representative physical sample.
Can interior and exterior faces use different colors?
Do not assume availability from the public listing. Show the intended allocation on the finish schedule and ask for written feasibility, price and sample confirmation.
What should appear on the finish sample approval?
Record the product series, finish process, color reference, gloss or texture, sample ID, approval date and the components to which the sample applies.
What product facts are verified for quotation?
The official table lists the RGNL-45 product description, 45 mm width, 6063-T5 thermal-break aluminum, 1.6 mm aluminum thickness, glass families, 5 mm + 15Ar + 5 mm notation, four finish routes and four opening modes. Project dimensions and other order details require written review.
Build an RGNL-45 Finish-Controlled RFQ
Share the window schedule, drawings, finish family, color reference, sample requirement, glass, quantities and destination. Rogenilan can review one defined RGNL-45 configuration instead of pricing an ambiguous color description.
