RGNL-45 French Door: Double-Leaf Glass, Hardware and Quote Specifications
A focused procurement review of the RGNL-45 thermal-break casement-door system when specified as a double-leaf French door.
Direct Answer: What Is the RGNL-45 French Door Configuration?
The official RGNL-45 Series Thermal Break Aluminum Casement Door page lists single, unequal double and double-door opening modes. For a French-door schedule, use the double-leaf configuration and define the active leaf, meeting stile, swing direction and hardware instead of relying on the style name alone.
The official table supports a 45 mm width entry, 6063-T5 thermal-break aluminum, 1.6 mm aluminum thickness, 5 mm + 9Ar + 5 mm tempered double glazing and CMECH hardware. Buyers may also review Rogenilan’s Double Doors category.
Verified RGNL-45 Quick Specs
| Item | Official information | Procurement check |
|---|---|---|
| Series | RGNL-45 Series Aluminum Casement Door | Name the exact system in the schedule. |
| Width entry | 45 mm | Confirm the applicable frame section in drawings. |
| Profile | 6063-T5 thermal-break aluminum | Request the proposed section and finish. |
| Thickness | 1.6 mm aluminum thickness | Confirm where the value applies. |
| Glass families | Tempered; double or triple tempered; laminated, Low-E, reflective or tinted | Specify a complete build-up. |
| Published double glazing | 5 mm + 9Ar + 5 mm tempered | Confirm coatings and project suitability. |
| Hardware | American brand CMECH | Approve exact hinges, lock and handles. |
| Finishes | Powder coating, anodized, wooden grain or PVDF coating | Approve color reference and sample. |
| Opening modes | Single, unequal double or double door | Use double door for the French-door pair. |
Choose the Double-Leaf Layout
Equal Double Door
Use two visually balanced leaves where the elevation and required clear opening support an equal pair. Identify the active leaf and meeting-stile arrangement.
Unequal Double Door
Use a wider daily-use leaf with a narrower secondary leaf when the approved opening calls for an asymmetric pair. Dimension both leaves.
Single Door Alternative
The same product page also lists a single-door mode. Keep it separate from the French-door schedule so pricing and hardware are not mixed.
Glass, Swing and Hardware Selection
The published 5 mm + 9Ar + 5 mm tempered build-up is a verified quotation reference, not a universal project specification. State each pane, cavity, gas fill, coating and safety requirement. For laminated or triple glazing, ask Rogenilan to confirm the full build-up and its effect on leaf and hardware design.
Show the view direction, inward or outward swing, hinge sides, active leaf, handle height, lock function and finished floor level. The official page lists CMECH hardware but does not publish the exact component schedule, size limits, leaf weights or threshold detail.
French Door Cost Factors
A comparable factory quotation needs a defined double-leaf assembly and supply boundary.
- Equal or unequal leaf dimensions
- Active leaf and swing direction
- Complete glass build-up
- Hinges, locks and handles
- Meeting-stile arrangement
- Threshold and drainage interface
- Finish process and color sample
- Accessories and installation scope
- Packaging and protection method
- Quantity, destination and Incoterm
What to Send for an RGNL-45 Quote
- Project location and building type
- Door schedule and elevations
- Structural opening dimensions
- Equal or unequal double-leaf layout
- Active leaf, handing and swing
- Glass and safety requirements
- Hardware and access requirements
- Finish and exact color reference
- Required reports or calculations
- Destination and delivery terms
FAQ
Can the RGNL-45 be configured as a French door?
Yes. Its official page lists a double-door opening mode. The quotation and shop drawing should define both leaves, the active leaf, swing direction and meeting stile.
Which double glazing is published for the RGNL-45?
The product table lists 5 mm + 9Ar + 5 mm tempered double glazing. Confirm the complete project glass specification before approval.
What profile and thickness are listed?
The table lists a 6063-T5 thermal-break aluminum profile and 1.6 mm aluminum thickness. Ask where that thickness applies in the proposed sections.
Which hardware is listed?
The page lists American brand CMECH. Obtain the exact hinge, locking and handle schedule for the double-leaf assembly.
Does the product page set maximum French-door dimensions?
No verified maximum unit or leaf dimensions are published in the table. Submit opening sizes and glass requirements for feasibility review.
Request an RGNL-45 French Door Quote
Send Rogenilan your double-leaf elevation, opening dimensions, active leaf, swing, glass, hardware, white finish reference, quantity and destination for a configuration review and quotation.
