RGNL-116 Aluminum Shutter China Exporter Import Documents
An import-ready shutter order should link every opening to its approved frame, louver field, flip-open direction, pull rod, glass or mesh scope, finish and package number. Buyers can then reconcile product records and shipment documents before dispatch.
Keep One Shutter Identity Across the Import File
The official RGNL-116 Thermal Break System Aluminum Shutter page lists a 116 mm system, 6063-T5 thermal-break aluminum profile, aluminum-alloy louver, shutter-specific pull rod, flip-open operation, four finish routes and alloy wire mesh. The product is assigned to the Shutter Windows product category.
The table also lists single-layer fine frosted glass as available. These entries establish the product baseline, not a complete import package. Panel dimensions, blade profile, glass thickness, mesh position, installation interfaces, package design and destination documents require an order-specific return.
Verified Quick Specs and Import Controls
| Field | Official Product Information | Import Record |
|---|---|---|
| Series | RGNL-116 Thermal Break System Aluminum Shutter | Use the exact series and opening ID across drawings, inspection and packages |
| System width | 116 mm | Return head, sill and jamb sections for the ordered opening |
| Profile | 6063-T5 thermal-break aluminum | Identify the selected frame, panel and mullion sections |
| Thickness entry | “1.6 Aluminium Thickness”; unit not stated | Keep the source wording and require the unit and applicable section in writing |
| Infill | Aluminum-alloy louver; fine frosted glass is listed as available | Show every louver and glass zone on the approved elevation |
| Hardware | Rogenilan shutter-specific pull rod | Record position, quantity, operation and package location |
| Opening mode | Flip open | Mark hinge side, viewed side, swing direction and panel number |
| Surface treatments | Powder coating, anodized, wood grain and PVDF coating | Record one selected treatment and approved sample reference |
| Screen | Alloy wire mesh | Confirm location, attachment, removal and package identification |
No public package dimensions, weights, loading quantity, lead time, freight rate, customs classification or destination approval is claimed. Confirm these for the actual order and route.
Separate Each Component State Before Shipment
Louver Field
Return blade profile, spacing, angle and control direction for each panel. The public table identifies the louver but does not publish these project dimensions.
Frosted Glass Zone
If selected, show glass location and the approved build-up. Do not infer thickness or safety treatment from the “available” listing.
Alloy Mesh Scope
State which openings receive mesh, which side it occupies and how it is removed. Keep the mesh package linked to the same opening ID.
Flip-Open Panel
Show hinge side, swing path and pull-rod access. Repeat the viewed-side panel number on the inspection sheet and package mark.
Build Four Linked Import Records
The opening register should show dimensions, panel and mullion layout, louver zones, frosted-glass zones, mesh, hinge side, swing, pull-rod position, finish and drawing revision. The component register should list frame parts, panels, louvers, rods, mesh and approved accessories by opening.
The package register should add package number, contents, quantity, opening IDs, handling notes and receiving sequence. A separate document register should list buyer- and broker-required commercial, transport, technical and inspection files with issuer, revision, language, due date and approval status.
Approve Protection Without Assuming a Standard Pack
The official product table does not publish a packing method. Ask the exporter to return protection for white finished frames, louver blades, pull rods, glass, mesh, corners and loose accessories. State whether shutters ship assembled and which items require site assembly.
Before release, compare package contents with the approved opening and component registers. Confirm that panel and opening references remain visible at receipt, and record shortages, damage or substitutions before dispatch.
Import Quote and Scope Factors
- Opening dimensions and quantities
- Panel and mullion arrangement
- Louver field and blade return
- Flip-open direction and hardware
- Frosted-glass zones and specification
- Alloy mesh scope
- Finish and sample process
- Pull rods and loose accessories
- Inspection and document scope
- Frame, blade and glass protection
- Package marks and receiving sequence
- Destination, Incoterm and delivery boundary
Compare quotations only after product supply, packing, freight, duties, unloading, storage and installation responsibilities are identified as included, excluded or separately priced.
RFQ Inputs for an Import-Ready Return
Send the shutter schedule, viewed-side elevations, dimensions, panel layout, hinge and swing, louver requirements, glass zones, mesh scope, pull-rod position, finish reference, quantities, destination, receiving constraints and buyer/broker document list.
Request selected sections; louver, glass, mesh and hardware schedules; approved finish; inspection points; protection and packing proposal; package-mark register; required documents; exclusions; alternatives; delivery basis and quotation validity.
RGNL-116 Aluminum Shutter Import FAQ
Which RGNL-116 facts are officially published?
The table lists the 116 mm system, 6063-T5 thermal-break aluminum profile, aluminum-alloy louver, pull rod, flip-open mode, four finish routes, available fine frosted glass and alloy wire mesh.
Is the thickness confirmed as 1.6 mm?
No. The source says “1.6 Aluminium Thickness” without a unit. Require the unit and applicable profile section in the returned technical schedule.
Does the official page publish a standard packing method?
No verified standard pack is stated. Request and approve protection, package contents and marks for the actual panel layout and delivery route.
How should louver panels and accessories be identified?
Link each panel, pull rod, mesh item and glass component to an opening ID, panel number, approved drawing revision and package number.
What should be reconciled before shipment release?
Match the approved schedule, component list, inspection record, package marks, packing list and required shipping documents by opening ID and revision.
Request an RGNL-116 Shutter Import Review
Share the approved shutter schedule, louver and glass zones, mesh, opening direction, pull-rod scope, finish, inspection points, package marks, destination and document list. Rogenilan can return the product and shipment records against one controlled opening schedule.
